Olympia Chimney Flue Liner Replacement Nationwide

Olympia Chimney Flue Liner Replacement: The Lynchburg Owner’s Guide

We stock and install Olympia Chimney-compatible flue liner replacement in Lynchburg, with most jobs running between $1,800 and $3,400 installed depending on length, diameter, and whether the chase needs reworking. Our trucks carry the common Olympia Chimney stainless steel liner sizes for wood-burning and gas applications, and we can usually inspect, measure, and schedule the replacement within a single visit. Most Lynchburg homeowners discover the problem during a routine sweep when the camera shows cracked tiles, gaps at the mortar joints, or thin spots where creosote has eaten through the clay.

Call (540) 328-6986

Which Olympia Chimney Models This Applies To

Olympia Chimney manufactures stainless steel flexible liners and rigid liner systems across several product lines, and matching the right replacement means reading the collar stamp or pulling a short section to check the gauge and alloy. The Olympia Flex series uses 316Ti stainless in .006 and .010 wall thicknesses, while their rigid systems are typically 304 or 316 stainless in 6-, 7-, and 8-inch diameters. We’ve replaced liners in Olympia systems dating back to the early 2000s, and the compatibility gotcha is usually at the top: the collar and rain cap assembly may be proprietary to Olympia’s dimensions, or it may accept standard Gelco or Famco components depending on the production year.

We carry both OEM Olympia Chimney replacement sections and quality aftermarket equivalents from DuraFlex and Copperfield on our Lynchburg trucks. The aftermarket route saves roughly 15-20% on parts without sacrificing the 316Ti alloy spec, but we always match the original gauge. If your existing liner is stamped “Olympia” and you’re unsure of the series, we’ll pull a photo and measurement during the Level-2 inspection. Hearthstone Chimney Co. is an independent service provider, not affiliated with Olympia Chimney, and we source parts based on what fits correctly and lasts.

Signs Your Olympia Chimney Flue Liner Replacement Is Failing

• Flaking or spalling clay tile inside the flue. In Lynchburg’s freeze-thaw climate, moisture that seeps through compromised mortar joints expands in winter and pops off tile faces. Once the inner surface is exposed, creosote embeds in the rough texture and accelerates deterioration.
• White efflorescence staining on the exterior brick. This salt deposit means water is migrating through the masonry because the liner is no longer containing combustion moisture. We’ve tracked this pattern repeatedly in older homes along Rivermont Avenue where the chimneys were built without liners originally and retrofitted in the 1990s.
• Smoke or odor seeping into upstairs rooms during a fire. A cracked or separated liner allows exhaust to leak into wall cavities or between flues in a shared chimney. The danger is carbon monoxide, not just smell, and it worsens when the furnace and fireplace share a flue chase.
• Chunks of tile in the firebox or cleanout. This is past the point of patching. When pieces are falling, the liner has lost structural integrity and can collapse during a chimney fire, blocking the flue entirely.
• Excessive creosote buildup despite regular burning habits. A damaged liner creates turbulence that cools smoke before it exits, depositing more creosote than a smooth, intact surface. In the humid summers around Lynchburg, that creosote absorbs moisture and becomes harder to remove safely.

Replacement Cost & What’s Included

The total installed price lands where it lands based on three factors: how many stories we’re working, whether the liner is straight or has offsets, and if the top of the chase needs refractory work or a new crown pour. We quote the full number before any work starts, and that number does not change. The 90-Day Done Right Promise covers the installation, and the liner itself carries the manufacturer’s warranty, typically lifetime for 316Ti stainless in residential use. Photos you can see, a plain-English verdict, and no surprises on the bill.

DIY or Call Us?

An owner can safely check three things from the ground: whether the cap is intact, whether there’s visible debris at the cleanout, and whether the damper opens and closes fully. Beyond that, flue liner replacement involves working on a steep roof, handling heavy stainless sections in a confined chase, and ensuring proper clearances to combustibles per the IRC and Lynchburg’s adopted building code. A liner that is not correctly supported at the top and bottom will sag, separate, or create a blockage.

The real risk is installing a liner that fits but does not vent correctly for your appliance type. Gas liners and wood-burning liners have different temperature ratings and connection requirements. We’ve been called to redo DIY jobs where the liner was the right diameter but the wrong alloy for the fuel, or where the top plate was sealed with generic caulk instead of high-temp silicone. If you’re seeing the symptoms above, call (540) 328-6986 and tell us what you’re seeing. We’ll tell you what it actually means, and we’ll quote the work honestly.

FAQs